IntelliSet
Select preset product settings using the IntelliSet feature
IntelliSet allows pre-selection of refrigeration settings for over 40 different products. Each IntelliSet stores the necessary settings (operation mode, setpoint, defrost interval, etc.) so the APX Control System automatically re-programs for the best temperature control, fuel economy, and performance for that product.
• APPLES — Continuous operation at 35°F (1.7°C), defrost every 3 hours • CHEESE — Continuous operation with setpoint range 35°F to 42°F (1.7°C to 5.6°C) • ICE CREAM — Start-Stop operation at -22°F (-30°C), defrost every 12 hours
Factory-programmed IntelliSets are available from your authorized Carrier Transicold Truck/Trailer dealer. Settings can be locked so they cannot be changed, or a setpoint range can be locked while still allowing adjustment within that range.
IntelliSet may be pre-programmed as "IntelliSleep", which allows Sleep mode to be entered by simply changing to that IntelliSet.
Range Protect may be applied to any IntelliSet. It prevents freezing or overheating of non-sensitive cargo by locking the unit in Start-Stop Operation when the compartment temperature is within the preset range (default 35°F to 70°F / 1.6°C to 21.1°C). Range Protect offers increased fuel savings over normal Start-Stop Operation.
With the unit powered up (START/RUN-OFF switch in START/RUN) and the default screen displayed, press the EQUALS (=) key. If the IntelliSet screen appears, proceed to Step 3. Otherwise, proceed to Step 2.
Press the MENU key until INTELLISET is displayed. Then press the INTELLISET soft key to display the IntelliSet screen.
The IntelliSet screen displays with a 10-second timeout, showing five of the available IntelliSets. The currently active IntelliSet will show "Active" or "Modified" to the right. The total number of available IntelliSets is shown in parentheses on the first line.
Press the UP (▲) or DOWN (▼) key to scroll through the list. Highlight the desired IntelliSet and press the EQUALS (=) key. The highlighted IntelliSet becomes active and "INTELLISET CHANGED" will display.
Press the EXIT soft key to return to the default display.
If setpoint change is allowed within the selected IntelliSet, refer to the Changing Setpoint page for instructions.
To have the unit go directly to the IntelliSet screen when the EQUALS (=) key is pressed, set "ENABLE INTELLISET AT = KEY" to "YES" in the Configuration menu.