Advanced User Mode
How to enter and exit Advanced User mode
As shipped from the factory, the system operates in Driver mode. In Driver mode, some data and menu items are not available. The system may be configured to operate in Advanced User mode permanently, making additional data and menus available at all times.
If the system is not configured for permanent Advanced User mode, you can enter it temporarily using the steps below.
With the system powered up (START/RUN-OFF switch in the START/RUN position) or in PC mode, press and release the two outside soft keys simultaneously. The system will not respond visually at this point.
Press the EQUALS (=) key within five seconds. The operator message panel will display "ADVANCE USER MODE ENABLED" for five seconds.
The Advanced User menus will be available for 60 minutes or until the START/RUN-OFF switch is placed in the OFF position, whichever comes first.
Toggling Between Modes
Press and release the two outside soft keys simultaneously.
Press the EQUALS (=) key. When toggling from Advanced User mode to Driver mode, "DRIVERS MODE ENABLED" will display for five seconds. When toggling from Driver mode to Advanced User mode, "ADVANCE USER MODE ENABLED" will display for five seconds.