Inspect Mode

Activate and deactivate Inspect mode for safe unit inspection

Inspect mode provides an additional layer of safety for operators and technicians. It is a user-activated feature that forces the unit to shut down and remain in shutdown regardless of operating state. Inspect mode should be used during all pre-trip inspections of the unit.

Resume After Inspection

After unit inspection, Inspect mode must be manually disabled. The unit will then resume standard operation.

Not a Lockout/Tagout Substitute!

Inspect mode is not a substitute for proper Lockout/Tagout procedures, which are always required when servicing the unit.

Enter Inspect Mode

Step 1: Navigate to Inspect Mode

With the system powered up (START/RUN-OFF switch in the START/RUN position), press the MENU key until INSPECT MODE is displayed.

Step 2: Activate Inspect Mode

Press the INSPECT MODE soft key. The unit will shut down. The ALARM light will flash, and the display will indicate that unit operation, including temperature control, has been disabled.

Exit Inspect Mode

Controls Locked Out

While the unit is in Inspect mode, all keys and functions are locked out except the EXIT soft key.

Step 1: Press Exit

Press the EXIT soft key to disable Inspect mode. The unit will resume standard operation.

Next StepIntelliSet