IntelliSet
Select a preset product profile using IntelliSet
IntelliSet allows you to select a pre-programmed product name (e.g. APPLES, CHEESE, ICE CREAM) that automatically configures the unit's setpoint, operating mode, defrost interval, and other settings for that product. Over 40 product profiles can be stored. This eliminates the need to manually adjust multiple settings each time a new product is loaded.
Factory-programmed IntelliSets are available from your authorized Carrier Transicold Truck/Trailer dealer.
IntelliSet may be pre-programmed as "IntelliSleep," which allows Sleep mode to be entered by simply changing to that IntelliSet.
Range Protect may be applied to any IntelliSet. It prevents freezing or overheating of non-sensitive cargo by locking the unit in Start-Stop Operation when the compartment temperature is within the preset range (default 35 to 70°F / 1.6 to 21.1°C). Range Protect offers increased fuel savings over normal Start-Stop Operation.
With the unit powered up (START/RUN-OFF switch in START/RUN) and the default screen displayed, press the "=" key. If the IntelliSet screen appears, proceed to Step 3. Otherwise, proceed to Step 2.
Press the MENU key until INTELLISET is displayed. Then press the INTELLISET soft key to display the IntelliSet screen.
The IntelliSet screen displays with a 10-second timeout and shows five of the available IntelliSets. The currently active IntelliSet will show "Active" or "Modified" to its right. The total number of available IntelliSets is shown in parentheses on the first line.
Press the ▲ or ▼ key to scroll through the list. Highlight the desired IntelliSet and press the "=" key. The highlighted IntelliSet becomes active and an "INTELLISET CHANGED" message will display.
Press the EXIT soft key to return to the default display.
If the selected IntelliSet allows setpoint changes, you can adjust the setpoint within the allowed range. Refer to the Changing Setpoint page for instructions.
To have the unit go directly to the IntelliSet screen when you press the "=" key, set the "ENABLE INTELLISET AT = KEY" configuration to "YES" (see Section 5.2.3).