Inspect Mode

Activate and deactivate Inspect mode for safe unit inspection

Inspect mode provides an additional layer of safety for operators and technicians. It forces the unit to shut down and remain in shutdown regardless of operating state. Use Inspect mode during all pretrip inspections of the unit.

Not a Lockout/Tagout Substitute!

Inspect mode is NOT a substitute for proper Lockout/Tagout procedures, which are always required when servicing the unit.

Enter Inspect Mode

Step 1: Navigate to Inspect Mode

With the system powered up (START/RUN-OFF switch in the START/RUN position), press the MENU key until INSPECT MODE is displayed.

Step 2: Activate Inspect Mode

Press the INSPECT MODE soft key. The unit will shut down. The ALARM light will flash, and the display will indicate that unit operation, including temperature control, has been disabled.

Exit Inspect Mode

Step 1: Locate the EXIT Key

While the unit is in Inspect mode, the EXIT soft key will be available. All other keys and functions will be locked out.

Step 2: Disable Inspect Mode

Press the EXIT soft key to disable Inspect mode. The unit will resume standard operation.

Next StepSwitching Operating State