Remote Panel
Using the optional remote control panel to operate the unit
The unit may be fitted with an optional remote control panel. The remote panel is very similar to the main APX display module and shows compartment setpoints, temperatures, and operating modes (heat, cool, or defrost). It can be mounted on the front bulkhead, in the compartment, or in the wall itself.
The remote panel keys, soft keys, and alarm indicators are in the same locations as the main APX display module: • MENU key • DEFROST key • START/STOP - CONTINUOUS key • Alarm LED • Alarm key • "=" (Select) key • Arrow keys • Soft keys • Display
The remote panel can be used to: • Turn the unit On/Off • Check compartment temperatures • Check and change setpoints • Initiate manual defrost • Check mode of operation • Initiate Pre-trip
The remote panel cannot be used to: • Enter Advanced User and Technician modes • Access any USB functions, USB menus, PC mode, or Print
The remote panel does not have a USB port or an SROS (Start/Run/Off) switch. Unit ON/OFF is controlled by the "UNIT ON/OFF" soft key, which replaces the Engine Hours soft key on the main display.
The following functions work the same as on the main display: • Display compartment temperatures • Display current mode of operation for each compartment • Intelliset selection • Initiate Pretrip • Initiate Manual Defrost / Defrost Indication • Control display indication lock
Turning the Unit On/Off
The remote panel cannot operate if the SROS switch on the main panel is in the OFF position. The unit can be shut down using either the remote panel or the SROS switch.
To prevent a constant drain on the battery, the remote panel illuminates when the SROS switch is turned on but turns off after 30 minutes of inactivity. Press any button on the remote panel to turn it back on.
On the remote panel, press and release the MENU key until the "UNIT ON/OFF" soft key is displayed.
The "UNIT ON/OFF" soft key on the remote panel takes the place of the "ENGINE HOURS" soft key on the main display.
Press the "UNIT ON/OFF" soft key. The remote display will read "UNIT ON".
Press the "UNIT ON/OFF" soft key again. The remote display will read "UNIT SHUT DOWN".