Display, Timer & Battery Settings

The Other Settings menu lets you configure display preferences, APU run mode, auto timers, temperature start, and battery monitoring.

The following display settings are available: • Temperature — °C or °F units • Pressure — PSIG or BAR units • Date/Time — MM/DD/YYYY or alternate format • Language — English (default), Spanish, or French • Auto Dim — YES or NO, dims backlight when not in use • Brightness — 10–100% in 10% increments • Hour Format — 12 (default) or 24 hour

The following general settings are available: • Alarm Description — YES or NO, shows alarm description in the service menu • APU Mode — OFF, Cool, Heat, Fan, or Comfort Monitor • Control Probe — Cabin (default), Return, or Supply; sets which temperature sensor controls the setpoint • Manual Mode Max Runtime — 2–24 hours in 1-hour increments • Manual Mode Max Runtime Enable — YES or NO, enables or disables the maximum runtime • Outlet — YES or NO, enables or disables the power outlet

Enabling Auto Timer (ON or OFF) allows configuration of Timer 1 and Timer 2. Each timer can be set to run on specific days or every day.

• Timer 1 Day — Everyday (default), or any single day of the week • Activate Time — 0–23 hours, 0–60 minutes (default: 8:00) • Start Duration — 0–9 hours, 0–60 minutes (default: 1 hour 0 minutes) • Setpoint — 64.4° to 86°F cabin air setpoint

• Timer 2 Day — Everyday (default), or any single day of the week • Activate Time — 0–23 hours, 0–60 minutes (default: 8:00) • Start Duration — 0–9 hours, 0–60 minutes (default: 1 hour 0 minutes) • Setpoint — 64.4° to 86°F cabin air setpoint

• Auto Temp Start — ON or OFF, enables temp start configuration • Temp Start Temp — 41°F to -4°F (5°C to -20°C), temperature where temp start activates • Temp Start Duration — 1 to 4 hours in 1-hour increments (default: 2 hours)

• Auto Battery Monitor Enabled — ON or OFF • Battery Voltage — 11.0 to 13.5 volts (default: 11.8 volts), voltage level where battery monitor activates

• Comfort Monitor Max Duration — 30 to 1440 minutes (default: 480 minutes). Sets how long the APU will run in Comfort Monitor mode.