Enabling Run Mode
Select a run mode to start heating, cooling, or fans
You must select a Run Mode before heating, air conditioning, or fans will operate.
• HVAC OFF — Power unit and HVAC system are turned OFF • MANUAL HEAT — Electric and/or air heater runs depending on configuration. Operator can select desired temperature and fan speed. Cab temperature must be lower than 85°F for this mode to function. Power outlet is enabled. • MANUAL COOL — Air conditioning system runs. Temperature and fan speed may be adjusted. Cab temperature must be higher than 65°F for cooling to occur. Power outlet is enabled. • MANUAL FANS — Fan operates at operator-selected fan speed. Power outlet is enabled. • COMF MON (Comfort Monitor) — System automatically chooses heating or cooling to maintain set temperature. Fan speed may change automatically if required. Power outlet is enabled. • OUTLET ONLY — Power outlet is enabled. HVAC functions are turned OFF.
Run Mode Select
Press the MENU button from the Home screen.
Push the dial to select RUNMODE from the menu.
Turn the dial to cycle through the Run Mode options. Press the FAN button to select. Once the Run Mode is selected, the system begins operating in that mode.
Adjust Fan Speed
From the Home screen, rotate the dial to adjust fan speed. Rotate left to decrease and right to increase. An on-screen indicator will display the current fan speed.
One rotation of the dial represents one step. There are a total of six steps for fan speed.
Adjust Temperature Setpoint
From the Home screen, push in the dial button. The current setpoint will be shown on screen.
Rotate the dial left to lower the temperature or right to increase it.
CAB on the display signifies the current cabin temperature.