P11000@vector-8700low
Check Condenser Fan Motor 2
refrigeration
Description
Condenser fan motor draw is outside 0.8 to 3.5 Amps (460 VAC), and pretrip fails with “PRETRIP FAIL AND COMPLETED”.
Activation Conditions
Normal draw for the condenser fan motors is 0.8 to 3.5 Amps (460 VAC). The circuit tests outside this range.
Unit Behavior
Engine and Electric Operation: Pretrip will fail and display “PRETRIP FAIL AND COMPLETED”.
Reset Conditions
Auto Reset if Pretrip is started again, or alarm may be manually reset via keypad or by turning the unit off, then back on again.
Corrective Actions
Refer to procedure for Alarm P00190 Check Condenser Fan Motor.