Technician Reset Required
engine
Description
Technician reset required means engine oil pressure or coolant shutdown alarms have shut the unit down three times within 2 hours, and the unit shuts down and alarms.
Activation Conditions
The High Engine Temperature Shutdown Configuration and/or Engine Oil Pressure Shutdown Configuration is/are set to YES, and Alarm 00011 Check Engine Oil Pressure, 00012 High Coolant Temperature, or 00129 Check Engine Coolant Sensor - Check Engine Coolant sensor has become active and shut the unit down three times within the past 2 hours.
Unit Behavior
Shutdown and alarm.
Reset Conditions
Clear the alarm from inactive alarm list. This alarm and the alarm(s) that caused it can not be reset by turning switch OFF and then ON again.
Corrective Actions
1. Determine Which Alarm Activated This Alarm: Check active alarm list for 00011 Check Engine Oil Pressure, 00012 High Coolant Temperature, or 00129 Check Engine Coolant Sensor. One of these alarms will be present. Follow the troubleshooting steps for the alarm(s) found, and correct the alarm condition. All alarm conditions must be corrected. 2. Reset Alarm: Clear all inactive alarms (Section 1.2.2). All alarms must be cleared to start unit.