Back to Alarms
05103@aspen-apumedium

Ac Cb3

electrical

Description

AC power is present at TB1 but not at CB3 while running on Diesel or Shore Power, and CB3 outputs will not be powered.

Activation Conditions

The unit is operating in Diesel or Shore Power and AC voltage is present at TB1, but no voltage is present at CB3.

Unit Behavior

Alarm Only. CB3 outputs will not be powered when active

Reset Conditions

Auto Reset when AC power is restored at CB3 Manual reset from alarm menu in Aspen Interface or System Status in CabinTech or by turning the unit off, then back on.

Corrective Actions

1. Check for overload/short on outlet circuit. 2. Check continuity on ground to white neutral circuit at CCM TB1-2. 3. Replace CCM.