Check Engine Coolant Sensor
engine
Description
The Engine Coolant Temperature Sensor is out of range, and the unit gives an alarm only in engine operation.
Activation Conditions
Engine Coolant Temperature Sensor (ENCT) is not within the range of -58 to +266°F (-50 to +130°C).
Unit Behavior
Engine Operation: Alarm Only. Electric Operation: This alarm does not activate in electric operation.
Reset Conditions
Auto reset when sensor is in range or alarm may be manually reset using the display mounted keys or by turning the unit off, then back on again.
Corrective Actions
1. Check Sensor a. Inspect sensor and connector. Verify there is no damage to sensor, and no damage, moisture, or corrosion in connector. b. Check sensor resistance. (Refer to Note 3 in Notes Section) 10,000 Ohms @ 77°F (25°C). Refer to Table 8–5 for chart of sensor resistances. 2. Check Sensor Wiring a. Inspect connector pins and terminals at ENCU-33 and 11. (See wiring schematic Section 10.2). Verify there is no physical damage to harness, and no damage, moisture, or corrosion in connectors. b. Place the system in PC Mode. Refer to Note 2 in Notes Section Disconnect sensor from harness. Check for 3.0 ± 0.1 VDC volts at harness plug between pins. This verifies microprocessor output and wiring connections to sensor.